Elegir bien cadena del ancla starts with one simple step: measuring it correctly.
Many vessel operators assume the anchor chain size printed in documents is accurate. In reality, wear, standards, and past replacements often mean the actual size is different. If the size is wrong, you may face problems like poor anchoring performance, chain jumping on the windlass, or even safety risks.
In this guide, we’ll walk you through how to measure anchor chain size step by step, using simple tools and clear explanations.
Why Measuring Anchor Chain Size Is Important
The anchor chain does much more than connect the anchor to your vessel. It:
- Absorbs shock loads from wind and waves
- Keeps the anchor angle low for better holding power
- Works directly with the windlass and chain gypsy
If the tamaño de la cadena del ancla does not match your windlass or anchor:
- The chain may slip or jump
- Wear will increase quickly
- Anchoring safety is reduced
That’s why accurate measurement matters more than relying on nominal sizes.
What Does “Anchor Chain Size” Actually Mean?
When people talk about anchor chain size, they usually mean more than just thickness.
A complete anchor chain size includes:
- Chain diameter (d) – the thickness of the steel bar
- Link length (p) – total length of one chain link
- Link width (b) – overall width of the link
- Inside width – critical for windlass compatibility
Different standards define these dimensions slightly differently, which is why real measurement is always recommended.
Common Types of Anchor Chain
Before measuring, identify the type of anchor chain you have:
- Stud link anchor chain
- Has a bar (stud) across the link
- Stronger and commonly used on larger vessels
- Studless anchor chain
- No stud inside the link
- Lighter and easier to handle
- Short link vs long link chain
- Short links are designed for windlass use
- Long links are not suitable for most anchor systems
The chain type affects both measurement and compatibility.
Tools You Need to Measure Anchor Chain Size
You don’t need special equipment. Basic tools are enough:
- Vernier caliper or digital caliper
- Steel ruler or tape measure
- Flat surface
Avoid estimating by eye. Even a few millimeters can cause problems with the windlass.
Step-by-Step: How to Measure Anchor Chain Size
1. Measure the Chain Diameter (d)
- Measure the diameter of the steel bar forming the link
- Avoid heavily worn or corroded areas
- Take measurements at several points and use the average
This is the most commonly referenced anchor chain dimension.
2. Measure the Link Length (p)
- Measure from the outside edge of one end of the link to the other
- This dimension is critical for windlass gypsy matching
Even if two chains have the same diameter, different link lengths can make them incompatible.
3. Measure the Link Width (b)
- Measure the widest part of the chain link
- Also check the inside width if the chain runs through a gypsy
This ensures smooth operation without jamming or skipping.
Anchor Chain Size Standards You Should Know
Anchor chain sizes vary by standard, even if the diameter looks the same.
Common standards include:
- ISO anchor chain – widely used internationally
- DIN anchor chain – common in European markets
- ASTM / ABS standards – often used for commercial vessels
Because of these differences, always match measured dimensions, not just standard names.
Matching Anchor Chain Size with Windlass and Anchor
Correct anchor chain size is essential for proper system matching:
- The chain must fit the windlass gypsy exactly
- Incorrect size can cause chain jumping or uneven wear
- Anchor size, vessel size, and chain size should work as a system
When replacing an anchor chain, always confirm compatibility with existing equipment.
Common Mistakes When Measuring Anchor Chain
These errors happen more often than you might expect:
- Measuring only the diameter and ignoring link length
- Measuring worn sections instead of average condition
- Confusing stud link and studless anchor chain
- Assuming old documentation is correct
A few minutes of careful measurement can prevent expensive mistakes.
When Should You Re-measure Anchor Chain Size?
You should measure your anchor chain when:
- Buying a used vessel
- Replacing the windlass or anchor
- After long-term service and visible wear
- Chain origin or standard is unknown
Regular inspection improves safety and extends service life.
Final Thoughts: Measure First, Decide Second
Measuring anchor chain size is simple, but it plays a huge role in anchoring safety and equipment compatibility.
Always rely on actual measurements, not assumptions. A properly sized anchor chain improves performance, reduces wear, and keeps your vessel secure in all conditions.
{ “@context”: “https://schema.org”, “@type”: “FAQPage”, “mainEntity”: [ { “@type”: “Question”, “name”: “How do I measure anchor chain size?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Anchor chain size is measured by checking the chain diameter, link length, and link width using a caliper and ruler. Multiple measurements should be taken to ensure accuracy.” } }, { “@type”: “Question”, “name”: “Is anchor chain size only the diameter?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “No. Anchor chain size includes the chain diameter, link length, and link width. All of these dimensions affect compatibility with the windlass and anchor.” } }, { “@type”: “Question”, “name”: “Why does anchor chain size need to match the windlass?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “If the anchor chain size does not match the windlass gypsy, the chain may slip, jump, or jam, causing unsafe operation and increased wear.” } }, { “@type”: “Question”, “name”: “Can worn anchor chain affect its measured size?”, “acceptedAnswer”: { “@type”: “Answer”, “text”: “Yes. Wear and corrosion reduce chain diameter over time. That’s why measurements should avoid heavily worn areas and use average values.” } } ] }