If you own a ship, you already know anchor chains are not just heavy steel links. They keep your vessel safe when you drop anchor. But what’s the real “rule of thumb” when it comes to using them? Let’s break it down in plain language.
1. The Big Idea: Scope
“Scope” is simply how much chain you put out compared to the depth of the water.
- Calm, sheltered water → at least 5:1 (five times the depth).
- Normal conditions → 6–7:1 is the sweet spot.
- Strong wind or waves → go up to 8–10:1.
👉 Example: If the water (plus tide) is 10 meters deep, with a 6:1 ratio, you should pay out 60 meters of chain. Easy math.
2. Why Chains Matter
Chains are heavy. That weight keeps the pull on the anchor flat instead of straight up. A flat pull makes it bite and hold better.
- Big ships usually use all chain.
- Some smaller boats use a mix of chain and rope, but always keep some chain near the anchor.
- Rope is lighter, but chain gives you real holding power.
3. Picking the Right Chain
Forget guessing. Chain size and length must match your vessel and anchor.
- Always have enough chain to cover your deepest anchoring spots, using the right scope, plus some spare.
- Don’t cut it short. Tide, wind, or current can change fast.
4. Setting the Anchor the Right Way
- Line up into the wind or current.
- Lower the anchor slowly — don’t throw it.
- Start paying out chain as the boat drifts back.
- Once you have enough chain out, give a gentle reverse pull to let the anchor dig in.
- Secure the chain and add a snubber if you have one, to soften shocks.
5. Seabed and Weather Count Too
- Sand or mud → good holding, but mud may need more scope.
- Rock or mixed bottoms → harder to grip, sometimes useless.
- Changing wind or tide → always leave extra space; your boat will swing.
6. Common Mistakes
- Only looking at water depth and forgetting tide.
- Using the shortest scope possible to “save time.”
- Not checking for worn or rusty links.
- Forgetting to mark chain length when paying out.
7. Chain Care Made Simple
- Inspect links near the anchor and bow most often.
- Replace bent or thin links.
- Make sure shackles are locked tight.
- Keep rust under control; re-galvanize or swap if needed.
8. Quick FAQ
Q: How much chain should I carry?
A: Enough for your deepest regular anchoring spot at proper scope, plus extra.
Q: When should I use two anchors?
A: When wind shifts are big, or when one anchor alone won’t hold.
Q: My anchor keeps dragging — what now?
A: Try resetting it, change your angle, or move to a better bottom.
최종 요점
The simple rule of thumb is: 5–7 times the depth in normal conditions, 8–10 in heavy weather. Anchor chains give you weight, strength, and peace of mind — but only if you use the right length and keep them in good shape.
